The Gotrax Scooter is a portable electric scooter that needs to be charged for running. It uses a lithium battery that requires a connection to a charger unit for charging. The battery gets drained after continuous usage of the scooter and needs to be refilled with power by connecting it to the charger through the charging port.
Gotrax scooters are a fun and convenient way to commute. Many users are still wondering, “How to properly charge my Gotrax scooter for the longest runtime?” The charging process is quite simple just locate the charging port under the deck, plug the charger into the port and a wall outlet, and leave it to charge fully for 5-8 hours before your next ride.
To charge a Gotrax scooter, locate the charging port on the underside of the battery compartment. Plug the charger into a power outlet and connect the other end to the scooter’s charging port. Charging takes approximately 5-8 hours for a full charge. An indicator light on the charger shows when charging is complete. Always fully charge the scooter before each use to enjoy long run time on a single charge.
Understanding Charging Options for Gotrax Scooter
The Gotrax scooter uses a lithium battery. This battery type lets you travel farther on a single charge. But the battery will run out of power after using the scooter for some time. Then you must charge the battery again before your next ride. There are a few ways to charge a Gotrax scooter battery.
The easiest way is to use the charger that comes with your scooter. You can find the charging port under the scooter’s deck. Plug the charger into the port and a wall outlet. Leave the charger plugged in until the light turns solid green. This shows the battery is fully charged. Fully charging takes around 5-8 hours. Now you can unplug the charger and your scooter battery is ready to go for another long ride. Always fully charge the battery before riding to get maximum travel distance per charge.
Gotrax Scooter Charger Voltage
The charger that comes with your Gotrax scooter is designed to safely charge the scooter’s battery. It uses the proper voltage so it does not damage the battery. The voltage is important because using a charger with too much or too little voltage can hurt the battery. The standard Gotrax charger voltage is 42 volts. This matches the voltage of the scooter’s lithium battery.
To make your Gotrax GXL V2 faster, it is crucial to prioritize the proper charging equipment. Only use the charger that came with your scooter or opt for a replacement charger from Gotrax that is specifically designed to provide 42 volts. Avoid attempting to use a different charger, such as those intended for cell phones or laptops, as they do not offer the correct voltage for a scooter battery. Always verify that any new charger you purchase explicitly mentions that it supplies 42 volts. Utilizing anything other than a 42-volt charger poses a risk of damaging your scooter’s battery over time.
How long does a Gotrax Scooter take to Charge
A fully drained Gotrax scooter battery takes between 5 to 8 hours to fully charge when using the correct charger. The charger will have lights that indicate the battery’s charge level. As it charges, the lights will slowly change from red to orange to green. When all the lights are solid green, the battery is completely charged and ready for your next ride.
It is best to leave the charger connected to the scooter and plugged into an outlet for the full recommended charging time. Even if the lights change to green sooner, the battery has not reached maximum power. A full 5-8 hours of charging ensures the battery is at 100% capacity before riding again. Never rush the charging process, as that can negatively impact the life of the battery over many charge cycles. Always fully charge your Gotrax scooter for longest range and performance.
7 Simple Steps to Charge Your Gotrax Scooter
Charging your Gotrax scooter is easy when following the seven simple steps. Starting with turning the scooter off prevents battery drain during charging.
Power off the Scooter
To charge your Gotrax scooter, first power it off by pressing and holding the power button for 3 seconds. This ensures the battery is not draining while you attach the charger.
Locate the Charging Port
The charging port for Gotrax scooters is located on the underside of the scooter’s deck, usually towards the rear. It is a round socket that the charger plugs into. Make sure any dirt or debris is removed from around the port so the charger has a snug connection.
Plug into the Charging Port
Take the charger that came with your scooter and plug the wide end firmly into the charging port on the scooter. You may need to apply a bit of pressure until it clicks into place. Do not force it if it does not seem to fit easily.
Plug into the Power Source
With the charger now attached to the scooter, plug the other end into a standard electrical wall outlet. Use only the charger that came with your Gotrax scooter, as other chargers may damage the battery.
Charging Indicator
Most Gotrax chargers have LED lights that indicate the battery’s charging level. As it charges, the lights will change from red to orange to green. Full solid green means a complete charge.
Gotrax Scooter Charging Time
A fully drained battery takes 5-8 hours to fully charge when the charger is plugged in continuously. Leaving the charger plugged in for the entire time ensures the battery is at 100% capacity.
Disconnect and Store
Once charging is complete, simply disconnect the charger from the scooter and outlet. You can now store your fully charged scooter until your next ride. Be sure no water or debris enters the charging port.
Tips for Maximizing Gotrax Scooter’s Battery Life
Following a few basic maintenance tips can help extend the life of your Gotrax scooter’s battery significantly. Proper charging and storage practices are important to gain the most use from the battery over its lifespan. Here is a table with tips for maximizing a Gotrax Scooter’s battery life.
| Tip | Details |
| Fully charge the battery | Always fully charge the battery before each use by letting the charger charge for the full 5-8 hours. This is important for maximizing range and battery health. |
| Only use the official charger | Only use the charger that came with the scooter. Other chargers may damage the battery. |
| Don’t overcharge | Do not leave the scooter charging for more than 24 hours at a time. Always monitor the charging process. |
| Avoid fully discharging | Do not drain the battery below 20% to avoid damage. This helps extend the overall lifespan. |
| Partial charge storage | When storing the scooter for extended periods, keep the battery at 40-60% charge rather than full or empty. |
| Control temperature | Store in a cool, dry place out of direct sunlight. High temperatures can negatively impact the battery over time. |
| Check regularly | Check the battery level regularly when charging and disconnect once fully charged at 100%. This is how to properly charge your Gotrax scooter. |
FAQ’s
How do you know when your GoTrax scooter is charging?
The GoTrax scooter charger has LED lights that indicate the battery’s charging level. As the battery charges, the lights will transition from red to orange to green. When fully charged, all the lights will be solid green.
Where can I charge my GoTrax scooter?
You can charge your GoTrax scooter in any location with a standard AC power outlet. Simply plug the charger into the scooter’s charging port and then into the wall outlet to begin charging the battery.
How long does a GoTrax take to charge?
A fully drained GoTrax scooter battery will take approximately 5-8 hours to fully charge when using the correct charger. It’s best to leave the charger plugged in for the entire charging period.
How can I charge my electric scooter without a charger?
It is not possible to charge an electric scooter’s battery without using the proper charger that came with the scooter. Charging the battery incorrectly can permanently damage it.
How do I manually charge my scooter battery?
It is not recommended to manually charge an electric scooter battery. The battery needs to be charged using the scooter’s manufacturer-approved charger only to ensure safe and effective charging. Manually charging risks damaging the battery.
Conclusion
The easiest and best way to charge your Gotrax scooter battery is by using the charger that comes with the scooter. This charger has the correct voltage of 42V to safely charge the lithium battery. You simply plug the charger into the charging port on the scooter and then into a wall outlet. Allow 5-8 hours for a full charge. Following the tips for maximizing battery life will help your battery last as long as possible. Always use the original charger and fully charge between uses. With proper care, your Gotrax scooter battery will power your rides for many miles of fun.
Taking good care of the battery when charging or storing helps keep a Gotrax scooter running smoothly. Always make sure the charger is correctly plugged in and charging fully. Check that all lights are green when charging is done. Storing in a cool place keeps the battery healthy. Using just the manufacturer charger prevents damage and can shorten battery use over time. Your Gotrax scooter will stay ready whenever you need it with proper charging care.
I’m passionate electric scooter enthusiast and the voice behind this blog. I’m here to share my expertise and insights with you. From in-depth reviews to problem-solving guides, my goal is to help you make the most of your electric scooter experience.
